PWS 7102 1kW

Air/water heat exchanger 950 W
  • robust steel cover, easily paintable
  • two performance classes, cut-out compatible with PWS 7062
  • completely installable or mountable externally and internally
  • maintenance-free mounting-friendly seal, no elaborate reworking of the mounting cut-out
  • integrated thermostat and solenoid valve for temperature control
  • integrated temperature monitoring with alarm contact

protection system

protection system

temperature alarm

temperature control

side mounting

Technical data

DataPWS 7102
Rated voltage ±10 %50/60 Hz AC60 Hz AC
230 V115 V
Cooling capacity at 200 l/hW10/A35950 W
Ambient temperature+1 … +70 °C / +34 … +158 °F
Water inlet temperature+1 … +35 °C / +34 … +95 °F
Degrees of protection
according to EN 60529
IP 55towards the electrical enclosure
if used as intended by the manufacturer

Further technical details, performance curves and dimensions can be found in the product download on this page on the top at the right.

Downloads

Description Language Type Size Download

Product Sheet

  • English
pdf 250 KB Download

Operating manual

  • German
  • English
  • French
  • Italian
  • Spanish
pdf 160 KB Download

Data sheet 115V

  • German
  • English
  • French
pdf 190 KB Download

Data sheet 230V

  • German
  • English
  • French
pdf 190 KB Download

3D-model (STEP)

  • English
zip 1.2 MB Download

Cut-out

  • German
  • English
pdf 670 KB Download

Declaration of Conformity

  • German
  • English
pdf 360 KB Download

EAC Certificate

  • Russian
pdf 1.7 MB Download

Ordering details

Ordering detailsPWS 7102
Rated voltage230 V AC115 V AC
Article number1205101005512051017055

Article numbers for other types on request.

Product Benefits

  1. 1

    Process reliability

    • High airflow rate and cooling capacity.
    • The heat load will not be transferred to the ambient air.
    • Integrated temperature monitoring with alarm contact.

  2. 2

    High resilience

    • Very high IP protection (up to IP 65).
    • Usable under aggressive environmental conditions.
    • Independent from the ambient temperature at the place of installation.

  3. 3

    Service and mounting friendly

    • Compact design.
    • Seal requires no elaborate reworking of the mounting cut-out.
    • Maintenance-free.

  4. 4

    Robust

    design to be used under toughest ambient conditions.

  5. 5

    Economic

    • System-compatible with chillers.
    • Can be integrated in existing cooling circuits.
    • Integrated thermostat and solenoid valve for energyefficient temperature control.