DTI/DTS 6X2E

Cooling units 2000–4300 W

DTI: for partially recessed mounting in the door or side
DTS: for outer mounting on the door or side

  • the innovative, brushless direct current technology (Brushless DC) makes an extreme energy efficiency (EER) of >6 possible
  • XC Controller: the operating unit which was developed especially for this series makes communication between the cooling unit and machine control possible and also the integration into production processes
  • large distance between intake and exhaust vents, safe circulation within the electrical enclosure due to long passage of air, therefore hot spots are eliminated
  • exceptional serviceability
  • optional filter (easy to retrofit)
  • communication interface "Modbus" to integrate the cooling unit into the existing machine control or in a cloud solution

protection system

partially recessed mounting (DTI)

side mounting (DTS)

top EER / energy saving

high performance at high temperature

connectivity

cut-out compatible to A/A | A/W units

large distance in/out no hot spots

tool-less filter mat changing

tool-less mounting

service friendly

Technical data

DataDTI 6X2EDTS 6X2E
Cooling capacityregulated2000–4300 W
Rated voltage ¹ ±10 %AC 50/60 Hz
400/460 V 3~
Cooling capacityA35/A204800 W
Cooling capacity
according to EN 14511
A35/A354300 W
A35/A503900 W
Starting currentno switch-on peaks
Ambient temperature+15 … +55 °C / +59 … +131 °F
Degrees of protection
according to EN 60529
IP 54towards the electrical enclosure
if used as intended by the manufacturer
Condensate managementintegrated condensate evaporation system with safety overflow

Downloads

Description Language Type Size Download

Product Sheet

pdf 340 KB Download

Ordering details

Ordering detailsDTI 6X2EDTS 6X2E
TypeRated voltage400 V
XC ControllerArticle number1389683205513886832055

Product Benefits

  1. 1

    Simplified dimensioning

    Thanks to highly efficient speed control, every unit covers a wide power range. This leads to a small type diversity and correspondingly to a large design safety.

    (1) DTI 6X1E with a performance range of 1,000–2,600 W.
    (2) DTI 6X2E with 2,000 to 4,300 W A power range of 1,000–4,300

  2. 2

    Highly efficient BLDC technology

    The innovative, brushless direct current technology (Brushless DC) makes an extreme energy efficiency (EER) of >6 possible. Thereby, the cooling occurs with high precision within a very tight tolerance range.

  3. 3

    Modbus

    The communication interface "Modbus" to integrate the cooling unit into the existing machine control or in a cloud solution.

  4. 4

    XC Controller

    The operating unit which was developed especially for this series makes communication between the cooling unit and machine control possible and also the integration into production processes.

  5. 5

    Long passage of air

    The large distance between the cold air outlet (bottom) and warm air inlet (top), has aerodynamically improved circulation of the electrical enclosure which prevents hot spots on especially stressed components.

  6. 6

    Cloud technology

    The cloud solution developed in cooperation with Telekom Deutschland enables browser-based access to the time unit data and storage and analysis of log data.