PAS 6043

Air/air heat exchanger 20 W/K

PAS: for outer mounting on the door or side

robust steel cover, easily paintable
cut-out compatible with DTS 9041
mounting-friendly seal, no elaborate reworking of the mounting cut-out
integrated thermostat for temperature control
additional thermostat for excessive temperature warning
maintenance-free
large distance between intake and exhaust vents, safe circulation within the electrical enclosure due to long passage of air, therefore hot spots are eliminated

protection system

temperature alarm

temperature control

side mounting (PAS)

cut-out compatible to DT | A/W units

Data		PAS 6043
Rated voltage ±10 %		AC 50/60 Hz
Rated voltage ±10 %		230 V 1~
Specific cooling capacity		20 W/K
Unimpeded airflow (free flow)	internal	240 / 280 m³/h
Unimpeded airflow (free flow)	external	240 / 280 m³/h
Ambient temperature		–25 … +55 °C / –13 … +131 °F
Degrees of protection according to EN 60529	IP 54	towards the electrical enclosure if used as intended by the manufacturer
Degrees of protection according to EN 60529	IP 34	towards the surroundings if used as intended by the manufacturer

Further technical details and dimensions can be found in the download section on this page under product sheet.

Description	Language	Type	Size	Download
Product sheet	English	pdf	600 KB	Download
3D-model PAS (STEP)	English	zip	1.3 MB	Download
Cut-out PAS (DXF)	English	zip	4.2 KB	Download
Declaration of conformity	English German	pdf	110 KB	Download

Further software tools for digital product integration into your planning and documentation (such as Eplan macros) can be found at MyPfannenberg.

Ordering details		PAS 6043
230 V AC	Article number	12981111055

Accessories		Piece	Article number
Filter adapater (RAL 7035)		1	18060200000
Fleece filter		5	18061600000

1

Large distance between intake and exhaust vents

for safe air circulation and elimination of hot spots.
2

Mounting auxiliary edge

allows the heat exchanger to stand freely when unpacking and before installing, and prevents the unit from slipping out uncontrollably during installation into the mounting cut-out by 1 person.
3

Service friendly

due to direct access to the fans, thus 80 % shorter repair times.
4

Optional pre-filter

upgradable with aluminium, nonwoven or fluted filter, for applications with heat exchangers in different ambient conditions.
5

Highest variability

due to cut-out compatibility for 5 performance classes and to Pfannenberg cooling units and air/water heat exchangers.
6

Integrated thermostat

for temperature control; additional thermostat for excessive temperature warning and maintenancefree.