FLH radiant heaters are used in combination with a thermostat or hygrostat, predominantly for the avoidance of excessively low temperatures or excessively high humidity in the control cabinet. Different performance ratings from 10 to 150 Watts ensure that the correct heating power is always available. The total required heat can be distributed in a control cabinet according to needs. Available with either terminal or connecting cable.
| Data | FLH 010 | FLH 015 | FLH 030 | FLH 045 | |
|---|---|---|---|---|---|
| Heating performance (Ta = +20 °C) | 10 W | 15 W | 30 W | 45 W | |
| Degrees of protection for intended purpose of use | IP 44 (connecting cable) and IP 20 (plug terminal connector) | ||||
| Operating temperature | –40 … +70 °C / –40 … +158 °F | ||||
| Storage temperature | –40 … +70 °C / –40 … +158 °F | ||||
| Type of mounting | snap fastening for 35 mm profile bars according to EN 60715 | ||||
Further technical details and dimensions can be found in the download section on this page under product sheet.
| Ordering details | FLH 010 | FLH 015 | FLH 030 | FLH 045 | |
|---|---|---|---|---|---|
| with terminal | Article number | 17001005007 | 17001505007 | 17003005007 | 17004505007 |
| with connecting cable | Article number | 17001005017 | 17001505017 | 17003005017 | 17004505017 |
Article numbers for other types on request.
Integrated snap fastening for 35 mm DIN-rail.
and robust construction without fan.
Predominantly used in control cabinets for the avoidance of excessively low temperatures or excessively high relative humidity.
against condensate forming in the cabinet by means of fast heating due to PTC technology.
ensure that the correct heating power is always available. The total heat necessary can be distributed according to the needs.
Depending on the existing connecting conditions, options are available with a 500 mm connecting cable or a plug terminal connector.
