DTI/DTS 6X2E

Cooling units 2000–4500 W

DTI: for partially recessed mounting in the door or side
DTS: for outer mounting on the door or side

thanks to highly efficient speed controll, every unit covers a wide performance range. This leads to a small type diversity and correspondingly to a large design safety
amongst others innovations, the brushless direct current technology (BLDC) makes the market highest energy efficiency.
XC Controller: the operating unit which was developed from Pfannenberg especially for this series makes communication between the cooling unit and machine control possible and also the integration into production processes
large distance between intake and exhaust vents, safe circulation within the electrical enclosure due to long passage of air, therefore hot spots are eliminated
exceptional serviceability and optional filter (easy to retrofit)
communication interface "Modbus" to integrate the cooling unit into the existing machine control or in a cloud solution

protection system

partially recessed mounting (DTI)

side mounting (DTS)

top EER / energy saving

high performance at high temperature

connectivity

cut-out like A/A | A/W units

large distance in /out

tool-less filter mat changing

tool-less mounting

service friendly

Data		DTI 6X2E		DTS 6X2E
Cooling capacity	regulated	2000–4500 W
Rated voltage		AC 50/60 Hz
Rated voltage		230 V ±10 %	400 / 460 V ±10 %	230 V ±10 %	400 / 460 V ±10 %
Cooling capacity	A35/A20	4800 W
Cooling capacity according to EN 14511	A35/A35	4500 W
Cooling capacity according to EN 14511	A35/A50	3100 W
Starting current		soft start
Ambient temperature		+15 … +55 °C / +59 … +131 °F
Degrees of protection according to EN 60529	IP 54	towards the electrical enclosure if used as intended by the manufacturer
Condensate management		integrated condensate evaporation system with safety overflow

Ordering details		DTI 6X2E		DTS 6X2E
Type	Rated voltage	230 V	400/460 V	230 V	400/460 V
XC Controller	Article number	13897831555	13897832555	13887831555	13887832555

1

Simplified dimensioning

Thanks to highly efficient speed control, every unit covers a wide power range. This leads to a small type diversity and correspondingly to a large design safety.

(1) DTI 6X1E with a performance range of 1,000–2,800 W.
(2) DTI 6X2E with a performance range of 2,000–4,500 W.
2

Highly efficient BLDC technology

The innovative, brushless direct current technology (Brushless DC) makes an extreme energy efficiency (EER) of >6 possible. Thereby, the cooling occurs with high precision within a very tight tolerance range.
3

Modbus

The communication interface "Modbus" to integrate the cooling unit into the existing machine control or in a cloud solution.
4

XC Controller

The operating unit which was developed especially for this series makes communication between the cooling unit and machine control possible and also the integration into production processes.
5

Long passage of air

The large distance between the cold air outlet (bottom) and warm air inlet (top), has aerodynamically improved circulation of the electrical enclosure which prevents hot spots on especially stressed components.