DTI/DTS 9031

Cooling units 510 W

DTI: for partially recessed mounting in the door or side
DTS: for outer mounting on the door or side

  • robust: steel cover, easily paintable
  • suitable for use with a door width of 400 mm within the electrical enclosure due to long passage of air, therefore hot spots are eliminated
  • large distance between intake and exhaust vents, safe circulation
  • integrated fault and door contact
  • DTI variants: fast mounting without drilling and adhering the electrical enclosure seal

partially recessed mounting (DTI)

side mounting (DTS)

protection system

large distance in /out

tool-less mounting (DTI)

Technical data

DataDTI/DTS 9031
Rated voltage ±10 %AC 50/60 HzAC 60 Hz
400 V 2~¹230 V115 V
Cooling performance
according to EN 14511
A35/A35410 / 540 W510 / 580 W585 W
A35/A50305 / 360 W365 / 395 W545 W
Ambient temperature+15 … +55 °C / +59 … +131 °F
Degrees of protection
according to EN 60529
IP 54towards the electrical enclosure
if used as intended by the manufacturer

1 suitable for various supply voltages (see technical specific data sheet)

Further technical details, performance curves and dimensions can be found in the download section on this page under product sheet.

Further technical details and dimensions can be found in the download section on this page under product sheet.

Downloads

Description Type Size
Conformity DTx 9xx1 pdf 55 KB Download
Conformity_UKCA_085507005_Rev01_Mar24_DTI_DTS9xx1.pdf pdf 37 KB Download
Manual DTx 9x41 pdf 1.9 MB Download
Manual Controller pdf 4.6 MB Download
Manual DTx 9x31 pdf 1.2 MB Download
Supplement Test mode + MM (MC) pdf 250 KB Download
Supplement DTx 9031 230V SC pdf 450 KB Download
Supplement DTx 9031 115V SC pdf 450 KB Download
Supplement DTx 9031 400V 2~ SC pdf 750 KB Download
Supplement operating device pdf 1.2 MB Download
Supplement DTx 9031 230V CC/MC pdf 480 KB Download
Supplem. DTx 9031 400V 2~ MC pdf 760 KB Download
Supplem. DTx 9031 115V CC/MC pdf 480 KB Download
Description Language Type Size Download

Product sheet

  • English
pdf 400 KB Download

3D-model DTS (STEP)

  • English
zip 1.1 MB Download

3D-model DTI 230V (STEP)

  • English
zip 2.4 MB Download

3D-model DTI 400V (STEP)

  • English
zip 2.1 MB Download

Cut-out

  • German
  • English
pdf 93 KB Download

UL recognized certificate

  • English
pdf 530 KB Download

EAC certificate

  • English
pdf 1.6 MB Download

Further software tools for digital product integration into your planning and documentation (such as Eplan macros) can be found at MyPfannenberg.

Ordering details

Ordering detailsDTI 9031
TypeRated voltage400 V AC230 V AC115 V AC
Standard ControllerArticle number132950490551329504105513295044055
Multi ControllerArticle number-13295071055-
Ordering detailsDTS 9031
TypeRated voltage400 V AC230 V AC115 V AC
Standard ControllerArticle number132450490551324504105513245044055
Multi ControllerArticle number132450790551324507105513245074055

Article numbers for other types on request.

Video

Product Benefits

  1. 1

    Standard cooling unit

    with an attractive price-performance ratio for safe cooling of industrial switch cabinets.

  2. 2

    Tool-free mounting (DTI)

    by 1 person is possible in less than 3 minutes with 55 % lower mounting costs.

  3. 3

    Condenser

    with large fin spacing enables very long maintenance intervals even without additional Nano coating.

  4. 4

    Large distance between intake and exhaust vents

    for safe air circulation and elimination of hot spots.

  5. 5

    Mounting auxiliary edge

  6. 6

    Spring plate (DTI)

    enables 1 person to install the cooling unit. This prevents it from falling out when unsupervised.

  7. 7

    Highest variability

    due to cut-out compatibility for up to 4 performance classes.

  8. 8

    Integrated sealing (DTI)

    finished and perfectly mounted.

  9. 9

    Integrated door and failure contact

    for automatic stand-by mode, if the door is open and opening of a relay as a centralised fault indication, in the event of no voltage supply, temperature too high or too low, temperature sensor is defect or short circuit in the air circuit for example.