Вернуться к обзору продукции

DTFI 6021

Cooling unit 350 W
Направить запрос о продукте Инструмент подсчета PSS

• Compact cooling unit for small enclosures and control panels
• Cutout-compatible with PF67.000 filter fan
• Use of F-gas-compliant refrigerants
and reduced refrigerant charge
• UL Listed in accordance with UL 60335 for long-term
planning reliability and simplified machine approval

partially recessed mounting

protection system

cut-out compatible

Технические характеристики

DataDTFI 6021
Rated voltage ±10 %AC 50/60 Hz
230 V
Cooling performance
according to EN 14511		A35/A35350 / 370 W
A35/A50240 / 260 W
Ambient temperature+15 … +45 °C / +59 … +113 °F
RefrigerantR513A, 315 g
Degrees of protection
according to EN 60529		IP 54towards the electrical enclosure
if used as intended by the manufacturer

1 suitable for various supply voltages (see specific technical datasheet).

Further technical details, performance curves and dimensions can be found in the download section on this page under product sheet.

Загрузки

Описание Тип Размер
Conformity DTx 6xx1 pdf 57 KB Download
Описание язык Тип Размер Загрузить

Product sheet
  • английский
 pdf 810 KB Загрузить

3D-model (STEP)
  • английский
 zip 6,2 MB Загрузить

Cut-out
  • английский
 pdf 51 KB Загрузить

UL recognized certificate
  • английский
 pdf 530 KB Загрузить

EAC certificate
  • русский
 pdf 1,6 MB Загрузить

Информация о заказе

Ordering detailsDTFI 6021
TypeRated voltage230 V AC
Standard ControllerArticle number13874141055

Преимущества продукции

  1. 1

    Standard cooling unit

    with an attractive price-performance ratio for safe cooling of industrial switch cabinets.

  2. 2

    Condenser

    with large fin spacing enables very long maintenance intervals even without additional Nano coating.

  3. 3

    Large distance between intake and exhaust vents

    for safe air circulation and elimination of hot spots.

  4. 4

    Mounting auxiliary edge

    allows the cooling unit to stand freely when unpacking and before installing, and prevents the unit from slipping out uncontrollably during installation into the mounting cut-out by 1 person.

  5. 5

    Integrated door and failure contact

    for automatic stand-by mode, if the door is open and opening of a relay as a centralised fault indication, in the event of no voltage supply, temperature too high or too low, temperature sensor is defect or short circuit in the air circuit for example.

  6. 6

    Highest variability

    due to cut-out compatibility for 5 performance classes and to Pfannenberg air/water and air/air heat exchangers.

  7. 7

    Integrated sealing

    finished and perfectly mounted.