| Data | DTI 6021 | |||
|---|---|---|---|---|
| Rated voltage ±10 % | AC 50/60 Hz | |||
| 230 V | ||||
| Cooling performance according to EN 14511 | A35/A35 | 350 / 370 W | ||
| A35/A50 | 240 / 260 W | |||
| Ambient temperature | +15 … +45 °C / +59 … +113 °F | |||
| Refrigerant | R513A, 315 g | |||
| Degrees of protection according to EN 60529 | IP 54 | towards the electrical enclosure if used as intended by the manufacturer | ||
Further technical details and dimensions can be found in the download section on this page under product sheet.
| Descrizione | Tipo | Dimensione | |
|---|---|---|---|
| Conformity DTx 6xx1 | 57 KB | Download |
| Ordering details | DTI 6021 | ||
|---|---|---|---|
| Type | Rated voltage | 230 V AC | |
| Standard Controller | Article number | 13894141055 | |
Article numbers for other types on request.
with an attractive price-performance ratio for safe cooling of industrial switch cabinets.
by 1 person is possible in less than 3 minutes with 55 % lower mounting costs.
with large fin spacing enables very long maintenance intervals even without additional Nano coating.
for safe air circulation and elimination of hot spots.
allows the cooling unit to stand freely when unpacking and before installing, and prevents the unit from slipping out uncontrollably during installation into the mounting cut-out by 1 person.
for automatic stand-by mode, if the door is open and opening of a relay as a centralised fault indication, in the event of no voltage supply, temperature too high or too low, temperature sensor is defect or short circuit in the air circuit for example.
finished and perfectly mounted.
due to cut-out compatibility for up to 4 performance classes.
enables 1 person to install the cooling unit. This prevents it from falling out when unsupervised.
